• Hardware Infromation
• Software Configuration
• Network Configuration
• How to log in ?
• How to access outside network ?
• How to access group machines ?

Hardware Information

• Processor : 2394.074 MHz
• Memory    :  512 M
• L2 cache : 512 K
• Floppy Drive :1.44M
• CD Rom Drive:ATAPI CD/DVD-ROM drive
• Network Card: Broadcom NetXtreme Gigabit Ethernet
• AGP Card :  Intel i810 @ 0xf0000000 128MB
• Hard Disk : 40G

Software Configuration

• Operation System : Linux version 2.4.20-8 (Redhat 9.0) Fully Installed
• GCC  : version 3.2.2 20030222
• No Disk Quota

Network Configuration

• IP Address :192.168.0.8 - 11
• Network Mask :255.255.255.0
• Gateway :192.168.0.1
• Broadcast Network : 192.168.0.0
• DNS Server :131.170.24.1
• Hostname :  ecml1, ecml2, ecml3, ecml4
• Disk drives are cross mapped and in a 'one in all' and 'all in one' sense.
  

How to log in ?

• Access machine ecml1 from building 10 level 11 room 27 (10.11.27)
  
• Specific account creation, please contact Xiang Li (xiali@cs.rmit.edu.au)

How to access outside network ?

• You can access outside network by ssh, ftp
• Web brower need
  • set proxy to http://www.cs.rmit.edu.au/proxy.pac
  • or manually set to proxy.rmit.edu.au port 8080

How to access group machines?

• Outside the lab, but in RMIT, you may 'ssh robores-gw.cs.rmit.edu.au', 'ssh 131.170.27.200' to access ecml1.
  
• Inside the lab or once you have log into ecml1, you may access other machines by ssh ecml2 or ftp ecml2 directly
• If you will be running X-windows programs you must use "ssh -Y"

Data Collections:

• Not available

Software:

• An old version of RMITGP http://www.cs.rmit.edu.au/~vc/rmitgp.v1.3.tar.gz